
Auto-Tie Balers
IBC's Auto-Tie Series offer both high speed and reduced operating cost. They eliminate the additional time and cost of having to manually tie off and remove finished bales from the baler. The auto tie balers are designed for small to medium sized MRF’s, Transfer Stations, Paper Brokers, & Printers / Converters.




Baler Models
System Features
Model Number | Overall Width | Overall Height | Overall Length | Feed Dimensions (W" x L") | HP | Max System Pressure | Main Bore | Ram Face Pressure | Cycle Time | Bale Size (W x H x L) | Bale Weight (OCC) | Bale Weight (ONP) | Bale Weight (PET) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AT-3043-8-30-XX | 182" | 98" | Variable | 28" x Variable | 30 HP | 3000 PSI | 8" | 128 PSI | 8-30 secs | 30" x 43" x Variable | Up to 1,800 Lbs | Up to 2,100 Lbs | Up to 800 Lbs |
AT-4343-8-30-XX | 182" | 98" | Variable | 41" x Variable | 30 HP | 3000 PSI | 8" | 79 PSI | 8-30 secs | 43" x 43" x Variable | Up to 2,000 Lbs | Up to 2,300 Lbs | Up to 900 Lbs |
AT-4843-8-30-XX | 185" | 98" | Variable | 46" x Variable | 30 HP | 3000 PSI | 8" | 73 PSI | 8-30 secs | 48" x 43" x Variable | Up to 2,100 Lbs | Up to 2,600 Lbs | Up to 950 Lbs |
AT-4343-10-50-XX | 182" | 102" | Variable | 41" x Variable | 50 HP | 3000 PSI | 10" | 120 PSI | 8-30 secs | 43" x 43" x Variable | Up to 2,300 Lbs | Up to 2,800 Lbs | Up to 1000 Lbs |
AT-4843-10-50-XX | 185" | 102" | Variable | 46" x Variable | 50 HP | 3000 PSI | 10" | 114 PSI | 8-30 secs | 48" x 43" x Variable | Up to 2,600 Lbs | Up to 2,900 Lbs | Up to 1050 Lbs |
System Features
Hydrulic Tier
The hydraulic tier allows the unit to be able to able to clear material out of the press head channels leading to more consistent operation. The hydraulic power also allows the system to pull 1,000 lb wire stacks instead of the industry standard 100 lb wire boxes leading to less down time due to wire change over.
Single Point Tension Circuit
Floating Tension cylinder provides equal tension onto the compression chamber. Fewer moving parts for better reliability.
Progressive Edge Blade
The baler combines its Hardened Tool Steel Shear blade with its 21"-22" Press head penetration to clear any potential material jams reducing unit downtime.